Yealink VC400 Administrator's Manual page 80

Administrator's Guide for Yealink Video Conferencing Systems
TLV Type
Parameters of LLDP feature on the system are described below.
Parameter
LLDP->Active
Packet
Interval(1-3600s)
To configure LLDP via web user interface:
Click on Network->Advanced.
1.
In the LLDP block, select the desired value from the pull-down list of Active.
2.
64
TLV Name
Inventory – Firmware
Revision
Inventory – Software
Revision
Inventory – Serial
Number
Inventory –
Manufacturer Name
Inventory – Model
Name
Asset ID
Description
Enables or disables LLDP feature on
the system.
Default: Disabled
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures the interval (in seconds)
for the system to send LLDP
requests.
Default: 60
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Description
Firmware revision of the system.
Software revision of the system.
Serial number of the system.
Manufacturer name of the system.
The default value is "Yealink".
Model name of the system.
The default value is "VCS".
Assertion identifier of the system.
Configuration Method
Remote Control
Web User Interface
Remote Control
Web User Interface