Yealink VC400 Administrator's Manual page 246

Administrator's Guide for Yealink Video Conferencing Systems
Parameter
HTTP
HTTP Port
HTTPS
HTTPS Port
To configure web server type via web user interface:
Click on Network->Advanced.
1.
Select the desired value from the pull-down list of HTTP.
2.
Enter the desired HTTP port in the HTTP Port field.
3.
Select the desired value from the pull-down list of HTTPS.
4.
230
Description
Enables or disables the user to
access the web user interface of the
system using the HTTP protocol.
Default: Enabled
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Specifies the HTTP port for the user
to access the web user interface of
the system.
Valid Values: 1-65535
Default: 80
Note: Ensure that the configured
port is not used. If you change this
parameter, the system will reboot to
make the change take effect.
Enables or disables the user to
access the web user interface of the
system using the HTTPS protocol.
Default: Enabled
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Specifies the HTTPS port for the user
to access the web user interface of
the system.
Valid Values: 1-65535
Default: 443
Note: Ensure that the configured
port is not used. If you change this
parameter, the system will reboot to
make the change take effect.
Configuration Method
Remote Control
Web User Interface
Web User Interface
Remote Control
Web User Interface
Web User Interface