Yealink VC400 Administrator's Manual page 218

Administrator's Guide for Yealink Video Conferencing Systems
Parameter
To configure video recording via web user interface:
Click on Setting->Video & Audio.
1.
Select the desired value from the pull-down list of Recording.
2.
Select the desired value from the pull-down list of Auto Recording.
3.
Click Confirm to accept the change.
4.
To record video when the system is idle via the remote control:
Press
1.
To record video during a call via the remote control:
Do one of the following:
1.
- Long press
recording.
- Press More soft key to open More screen.
Press
Open the More screen, scroll to USB Recording again, and then press
recording.
202
Description
Note: The auto recording feature is
available only when the recording
feature is enabled.
to start recording and press
to start recording and long press
or to scroll to USB Recording, and then press
Configuration Method
again to stop recording.
again to stop
to start recording.
to stop