Yealink VC400 Administrator's Manual page 155

The following table summarizes the supported video codecs on the system:
Name MIME Type
H.264 High
H264/90000
Profile
H.264 H264/90000
H.263 H263/90000
Video codecs parameters on the system are described below:
Parameter
Specifies the enabled video codecs
for the system to use.
Enable Codecs
Note: All support video codecs are
enabled on the system by default.
Specifies the disabled video codecs
Disable Codecs
for the system not to use.
To configure video codecs via web user interface:
Click on Account->Codec.
1.
Select the desired video codec from the Disable Codecs or the Enable Codecs column.
2.
Click or to disable or enable the selected video codec.
3.
Bit Rate Frame Rate
90 kbps to 5 fps to
2048 kbps 30 fps
Description
Configuring Call Preferences
Frame Size
Tx: WQVGA,360P, 448P,
540P, 720P, 1080P
Rx: Conventional Size
Below 1080P
Tx: CIF, 4CIF
RX: QCIF, CIF, 4CIF
Configuration Method
Web User Interface
Web User Interface
139