port used, and then informs the client. For more information, refer to RFC3489.
Capturing packets after you enable the STUN feature, you can find that the VC400/VC120 sends
Binding Request to the STUN server, and then mapped IP address and port is placed in the
Binding Response: Binding Success Response MAPPED-ADDRESS: 59.61.92.59:19232.
STUN feature parameters on the system are described below:
Parameter
Enables or disables the STUN
(Simple Traversal of UDP over NATs)
Active
feature on the system.
Default: Disabled
Configures the IP address or the
domain name of the STUN (Simple
STUN Server
Traversal of UDP over NATs) server.
Default: Blank
Configures the port of the STUN
(Simple Traversal of UDP over NATs)
STUN Port
server.
Default: 3478
Configures the NAT traversal type.
You can configure it for the SIP
account or SIP IP call separately.
NAT Traversal
Default: Disabled
Description
Disabled
STUN
StaticNat
Configuring Network
Configuration Method
Remote Control
Web User Interface
Remote Control
Web User Interface
Remote Control
Web User Interface
Remote Control
Web User Interface
85