1. Manuals
  2. Brands
  3. Yealink Manuals
  4. Conference System
  5. VC400
  6. User manual

Yealink VC400 User Manual

Video conferencing system
Hide thumbs Also See for VC400:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Administrator's Manual, User Manual
v

Advertisement

Table of Contents
loading

Related Manuals for Yealink VC400

Summary of Contents for Yealink VC400

  • Page 2 Copyright © 2015 YEALINK NETWORK TECHNOLOGY CO., LTD. Copyright © 2015 Yealink Network Technology CO., LTD. All rights reserved. No parts of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, photocopying, recording, or otherwise, for any purpose, without the express written permission of Yealink Network Technology CO., LTD.
  • Page 3 WEEE must not be regarded as unsorted municipal waste and must be collected and disposed of separately by a competent authority. We are striving to improve our documentation quality and we appreciate your feedback. Email your opinions and comments to DocsFeedback@yealink.com.
  • Page 4 Yealink VC400 video conferencing system firmware contains third-party software under the GNU General Public License (GPL). Yealink uses software under the specific terms of the GPL. Please refer to the GPL for the exact terms and conditions of the license.

  • Page 5: About This Guide

    First, verify with your system administrator that the IP network is ready for system configuration. Also be sure to read the Overview and Getting Started sections in this guide before you set up and use the VC400 video conferencing system. Topics provided in this guide include:...
  • Page 6 User Guide for the VC400 Video Conferencing System...

  • Page 7: Table Of Contents

    Web User Interface ..................... 15 Documents........................16 Getting Started ............... 17 System Installation ......................17 Installing the VC400 Video Conferencing System ............. 18 Installing the Camera ....................19 Installing Batteries for the Remote Control ..............20 Connecting the CPE80 Expansion Microphone ............21 Powering the System On or Off ..................
  • Page 8 User Guide for the VC400 Video Conferencing System Call Type ......................... 59 Bandwidth Settings ......................60 Audio Setting ........................61 Audio Output Device ....................61 Audio Input Device ..................... 62 Far-end Camera Control ....................63 Using the VC400 Video Conferencing System ....... 65 Placing Calls ........................

  • Page 9: Overview

    Overview This chapter provides an overview of the VC400 video conferencing system. Topics include: Packaging Contents  System Component Instructions  Icon Instructions  LED Instructions  User Interfaces  Documents  If you require additional information, or assistance to help you use your new system, contact your system administrator.

  • Page 10: Vcp40 Video Conferencing Phone

    User Guide for the VC400 Video Conferencing System VCP40 Video Conferencing Phone  L-Bracket (for installing the camera)  Camera Mounting Accessories  VCR10 Remote Control  2 AAA Batteries  Power Adapter ...
  • Page 11 Overview Cables  7 Cable Ties  Quick Start Guide  Check the list before installation. If you find that anything is missing, contact your system administrator. The following item is optional. You should purchase it separately if necessary. The CPE80 expansion microphone is used for expanding the audio pickup range. CPE80 Expansion Microphone ...
  • Page 12 It supports 16:9 and 4:3 aspect ratios. It can be compatible with different audio output devices, and can adapt to the display devices automatically. You do not need to change the VC400 codec once it has been installed properly in your environment. VC400 codec front panel...
  • Page 13 Resets the system to factory defaults Reset Key ⑬ Allows you to connect a universal security cable to VC400 codec, so you can lock it down. The system ⑭ Security Slot cannot be removed when locked. The VCC18 HD camera supports 18x optical zoom, white balance and automatic gain.
  • Page 14 (± 100 degrees range), tilted (± 30 degrees range). Infrared Sensor The infrared sensor is located within the Yealink logo. Aim the remote control at the camera IR sensor to operate the unit. The VCP40 video conferencing phone supports 360-degree audio pickup to achieve...
  • Page 15 Overview Connect the VCP40 phone to the VC400 codec. It can work as an audio device for the system. You can also place calls, answer calls or view directory and history on the VCP40 phone.
  • Page 16 User Guide for the VC400 Video Conferencing System System component instructions of the VCP40 phone are: Item Description Shows information about calls, messages, soft keys, time, date and other relevant data: • Call information—call duration LCD Screen ① • Icons (for example, •...
  • Page 17 Overview The VCR10 remote control provides 3 shortcut keys. It can help users to organize conference easily with intuitive and efficient operation in all screens. Hardware components of the remote control: Item Description ① Sleep Key Puts the system to sleep or wakes the system up. Located at the bottom left of the screen.
  • Page 18 User Guide for the VC400 Video Conferencing System Item Description Located at the bottom right of the screen. Label automatically identifies context-sensitive features. ④ Blue Shortcut Key In the idle screen, this is used to save and check the camera preset position, and corresponds to the Preset soft key.
  • Page 19 Overview Item Description Captures the on-screen image of the display device  when the phone is idle. Icons appearing on the display device are described in the following table: Icon Description Network is disconnected (flashing) Network is available Packet loss VCP40 video conferencing phone is not (flashing) connected...
  • Page 20 User Guide for the VC400 Video Conferencing System Icon Description Call mute Call encryption The content of the local camera Focus content Camera position Record a video Dialed calls Received calls Missed calls Dual screen mode Dual video sources (when a PC is...
  • Page 21 Flashing red The VC400 codec is upgrading firmware. Solid red The VC400 codec is in sleep mode. System exception (e.g., network unavailable, update Solid orange failure). The VC400 codec is powered off, or is not connect to the power adapter.

  • Page 22: User Interfaces

    Detailed operational steps will be explained in the feature section. You can use the remote control and display device to configure and use the VC400 video conferencing system.

  • Page 23: Web User Interface

    Overview You can customize your system via the web user interface. To access the web user interface, you need to know the IP address of your new system. To obtain the IP address, do one of the following: The IP address of the system is shown on the top right corner of the display device. ...

  • Page 24: Documents

    User Guide for the VC400 Video Conferencing System The following table shows documents available for the VC400 video conferencing system. Name Contents Where found Language In the package Yealink VC Series System installation Video Conferencing and network English/Chinese System Quick Start...

  • Page 25: System Installation

     Connecting the CPE80 expansion microphone  Up to two display devices can be connected to the VC400 codec. Because the display Note device is not included in the package, you need to purchase it separately if required. Ensure that the purchased display device supports HDMI input.
  • Page 26 Connect the power line for the display device. (Optional.) Connect the VGA cable to the PC port on the VC400 codec and a PC. Connect the power adapter to the DC19V port on the VC400 codec and power outlet.
  • Page 27 Getting Started You can choose to mount the camera on your TV or a wall, depending on your actual needs. Mounting the camera on a TV When your TV is less than 120 mm thick, you can mount the camera on your TV. Do the following: Lock the camera to the L-bracket.
  • Page 28 User Guide for the VC400 Video Conferencing System above. Lock the L-bracket with the M3× 8 screws. Move the setscrews on the L-bracket to the left holes. Lock the L-bracket to the wall with T4× 30 screws. Connect one end of the DVI cable to the camera and put the other end of the cable through the L-bracket.
  • Page 29 Getting Started Replace the battery cover. Dispose of waste batteries properly. Note Remove the batteries if they are not in use for a long period of time. If your video conferencing room is large, you can add an extra CPE80 expansion microphone to the MIC port on the VCP40 phone to expand the audio range of the conference phone.
  • Page 30 User Guide for the VC400 Video Conferencing System To power on the system: After all components are connected, press on the VC400 codec. The indicator LED on the VC400 codec then illuminates solid green. To power off the system: Do one of the following: –...
  • Page 31 (Next soft key) to continue or press (Previous soft key) to return to the previous screen. Edit the site name. The default site name is” Yealink VC400”. Press (Next soft key) to continue or press (Previous soft key) to return to the previous screen.
  • Page 32 User Guide for the VC400 Video Conferencing System The default administrator password is “0000”. Press (Next soft key) to continue or press (Previous soft key) to return to the previous screen. The display device shows firewall port mapping information. Press...
  • Page 33 Editing Fields on page 28. For more information about how to configure language, time and date, refer to Customizing the VC400 Video Conferencing System on page 33. Note Wrong network settings may result in the inaccessibility of your system. They may also have an impact on your network performance.
  • Page 34 User Guide for the VC400 Video Conferencing System Idle screen of the display device If the system has successfully started up, the idle screen will be shown. The following figure is an example of what is displayed on the LCD screen:...
  • Page 35 Getting Started Name Description action. Idle screen of the VCP40 phone Name Description Status icon Displays the phone‟s status. Displays four soft keys. History: Enters the History screen  Directory: Enters the Directory screen  Soft Keys DND: Enables or disables the Do Not ...
  • Page 36 User Guide for the VC400 Video Conferencing System If you want to You can Press to select a menu. Navigate through menus. Press to select an item. Expand pull-down menu Press to expand a pull-down list Select an option from the...
  • Page 37 Getting Started If you want to You can You can press to exit from the on-screen keyboard. Select the field, press to delete the Delete text you entered. entered text, or you can long press for 2 seconds to delete the entire field of text. Press to save.
  • Page 38 User Guide for the VC400 Video Conferencing System Press to select the desired list. Press to view the specific information. To view the system status via the web user interface: Click Status. The system status is displayed on the web user interface.
  • Page 39 Getting Started To view the system status via phone user interface: Press Press to select the desired list. Press or the Enter soft key to view the specific information.
  • Page 40 User Guide for the VC400 Video Conferencing System...

  • Page 41: Customizing The Vc400 Video Conferencing System

    Customizing the VC400 Video Conferencing System You can customize your VC400 video conferencing system by personally configuring certain settings, for example, site name, time & date and language. You can add contacts to the local directory manually or from the call history.

  • Page 42: Backlight

    User Guide for the VC400 Video Conferencing System Press to scroll to Automatic Sleep Time, and then press Select desired time from the pull-down list of Automatic Sleep Time. If Always On is selected, the system will not enter the sleep mode automatically.

  • Page 43: Site Name

    Customizing the VC400 Video Conferencing System Select the desired value from the pull-down list of Backlight Time. Click Confirm to accept the change. Site name is displayed on the status bar of the display device and VCP40 phone. When you make an IP address call to the other party, the site name will be displayed on the remote display device.

  • Page 44: Language

    User Guide for the VC400 Video Conferencing System Press (Save soft key) to accept the change. Site name can be configured via the web user interface at the path Setting->General->Site Name. The default language of the display device is English, and you can change it via the remote control.

  • Page 45: Time & Date

    Customizing the VC400 Video Conferencing System Select the desired language from the pull-down list of Language. Text displayed on the web user interface will change to the selected language. The time and date are displayed on the LCD screen of the VCP40 phone and display device.
  • Page 46 User Guide for the VC400 Video Conferencing System To configure the NTP server and date & time format via the remote control: Press (Menu soft key) to enter main menu. Press to select the Basic menu. Press to scroll to Date & Time, and then press Select the desired time format from the pull-down list of Time.

  • Page 47: Key Tone

    Customizing the VC400 Video Conferencing System Select the desired year from the pull-down list of Year. Select the desired month from the pull-down list of Month. Select the desired day from the pull-down list of Day. Select the desired hour from the pull-down list of Hour.
  • Page 48 User Guide for the VC400 Video Conferencing System Press to scroll to Key Tone, and then press to enable or disable this feature. Press (Save soft key) to accept the change. Key tone can be configured via the web user interface at the path Setting->General->Key Tone.
  • Page 49 Customizing the VC400 Video Conferencing System The current ringer volume of the system is displayed on the left of the display device. Press on the VCP40 phone to adjust the ringer volume. The LCD screen of the VCP40 phone displays the current ringer volume.

  • Page 50: Local Directory

    You can create a conference with other parties (up to 4 parties, including yourself). VC400 system can store up to 500 local contacts and 100 conference contacts. You can manage the local directory via the remote control or web user interface.
  • Page 51 Customizing the VC400 Video Conferencing System This chapter provides operating instructions for the local directory. Topics include: Adding Contacts  Placing Calls to Contacts  Editing Contacts  Deleting Contacts  Searching for Contacts  Search Source List in Dialing ...
  • Page 52 User Guide for the VC400 Video Conferencing System You can repeat step 6 to add the third number to the contact, and enter the third number in the Number 3 field. Press (Save soft key) to save the local contact.
  • Page 53 Customizing the VC400 Video Conferencing System You can also add conference contacts directly without searching action: press to select the desired local contact, and then press to add the desired local contact to the Member List. Press (Save soft key) to save the conference contact.
  • Page 54 User Guide for the VC400 Video Conferencing System You can also select Conference from the pull-down list of All Contacts, and then press to highlight the conference contact Press The system will call the first member of the conference contact. When the first member answers the call, the system will call the second member and repeat this until all conference members have joined to the conference.
  • Page 55 Customizing the VC400 Video Conferencing System Press to select the desired directory list (All Contacts or Conference). Press the Enter soft key or to view the contacts in the selected directory. Press to highlight the desired contact. Press the Send soft key, The system will call the first member of the conference contacts.
  • Page 56 User Guide for the VC400 Video Conferencing System Press (Call soft key). Press to select the Directory menu. Press to select the desired conference contact. Press (Detail soft key). Edit contact information. Press (Save soft key) to accept the change or press (Back soft key) to cancel.
  • Page 57 Customizing the VC400 Video Conferencing System Directory->Local. You can search local contacts or conference contacts via the remote control or web user interface. To search contacts via the remote control: Press (Call soft key). Press to select the Directory menu.
  • Page 58 User Guide for the VC400 Video Conferencing System If you want to match the LADP list, make sure LDAP is configured already. For more information about how to configure LDAP , contact your system administrator. To configure search source list in dialing via the web user interface: Click on Directory->Setting.
  • Page 59 You can import or export the contact list to share contacts between different systems or between system and application software (e.g., Outlook). The VC400 video conferencing system only supports the XML and CSV format contact lists. You can only import or export the contact list via the web user interface.
  • Page 60 User Guide for the VC400 Video Conferencing System Click Browse to locate a contact list file (file format must be *.xml) from your local system. Click Confirm to import the contact list. The web user interface prompts "The original contact will be covered, continue?".
  • Page 61 Customizing the VC400 Video Conferencing System The web user interface is shown as below: (Optional.) Check the The first line as the title checkbox. It will prevent importing the title of the contact information which is located in the first line of the CSV file.
  • Page 62 Click Export XML or Export CSV. The contact list is saved to your local system. The VC400 video conferencing system maintains call history lists of All Calls, Missed Calls, Placed Calls and Received Calls. The system supports up to 400 history lists. You can view the call history, place a call or delete an entry from the call history list.
  • Page 63 Customizing the VC400 Video Conferencing System Press to select the Call Features menu. Press to scroll to History record, and then press to enable or disable this feature. Press (Save soft key) to accept the change. The history record feature can be configured via the web user interface at the path Setting->Call Features->History Record.
  • Page 64 User Guide for the VC400 Video Conferencing System If the call history is more than one page, you can press to turn pages. To view call history via the VCP40 phone: Press the History soft key. Recent call history is displayed on the LCD screen of the VCP40 phone.
  • Page 65 Customizing the VC400 Video Conferencing System Press To place a call from the call history list via the VCP40 phone: Press the History soft key. Recent call history is displayed on the LCD screen of the VCP40 phone. Press soft key to switch call history list.
  • Page 66 User Guide for the VC400 Video Conferencing System Press (Delete soft key) to delete the entry. To clear call history via the remote control: Press (Call soft key). Press to select the History menu. The display device shows recent call history.

  • Page 67: Call History Management

    Call history management feature can be configured via the web user interface at the path Directory->History. The VC400 video conferencing system supports SIP and H.323 call types. You can configure which type to be used when the system is making calls. When the Auto call type is used, the system preferentially uses the H.323 protocol to place calls.
  • Page 68 User Guide for the VC400 Video Conferencing System Press to scroll to Call Type, and then press Select desired type or Auto from the pull-down list of Call Type. Press (Save soft key)to accept the change. Call type can be configured via the web user interface at the path Setting->Call Features->...
  • Page 69 Features->Uplink Bandwidth/Downlink Bandwidth. By default, the system automatically selects the available audio output devices. If the VCP40 phone is connected to the Audio In port on the VC400 codec, the system will use the VCP40 phone as the audio output device.

  • Page 70: Audio Output Device

    If the VCS phone is selected as the audio input device and the Audio In port on the VC400 codec is connected to the VCP40 phone, the system will use the VCP40 phone as audio input device. You can configure which audio input device is to be used according to the current environment.

  • Page 71: Far-End Camera Control

    Customizing the VC400 Video Conferencing System To configure the audio output device via the remote control: Press (Menu soft key) to enter main menu. Press to select the Video & Audio menu. Press to scroll to Audio Setting, and then press Select desired audio output device from the pull-down list of Audio Input.
  • Page 72 User Guide for the VC400 Video Conferencing System Press to select the Video & Audio menu. Press to scroll to Far-end Camera Control, and then press Press to scroll to Far Control of Near Camera, and then press to enable or disable this feature.

  • Page 73: Using The Vc400 Video Conferencing System

    Using the VC400 Video Conferencing System The VC400 video conferencing system can be used to place calls, answer calls, or conduct a conference call. You can switch layout, record videos or capture screenshots during a call. This chapter provides basic operating instructions for the VC400 video conferencing system.
  • Page 74 User Guide for the VC400 Video Conferencing System If the system fails to call, you can troubleshoot the problems according to the following prompts: Prompts Description The remote system rejects the incoming Call Failed Busy here call. Network disconnected Local network is disconnected...
  • Page 75 (Optional.) Select the desired bandwidth from the pull-down list of Auto. Click Video Call or Voice Call. The VC400 video conferencing system can support up to 5 parties (4 video calls and 1 voice call, including the conference initiator) in a conference call. You can use the...
  • Page 76 User Guide for the VC400 Video Conferencing System To place a multiple call via the remote control: Place a call to the first party. When the first party answers the call, press (More soft key) to open More window. Press to scroll to New Call, and then press to place a new call.
  • Page 77 Using the VC400 Video Conferencing System Enter the number of the third party in the Enter Number field, and then click Video Call or Voice Call. When the fourth party answers the call, you have created a five-way conference. When the system is receiving a call, you can answer or reject the call in the following...
  • Page 78 User Guide for the VC400 Video Conferencing System feature. Press to scroll to Auto Answer Mute, and then press to enable or disable this feature. If you disable this feature, the system will disable the auto answer mute feature. Press...
  • Page 79 Using the VC400 Video Conferencing System Press to scroll to DND, and then press to enable this feature. Press (Save soft key) to accept the change. icon will appear on the status bar of display device, and “DND ON!” will be prompted at intervals.
  • Page 80 User Guide for the VC400 Video Conferencing System Press (Back soft key) to return. You can also press the DND soft key on the VCP40 phone to enable or disable DND feature during an active all. DND during an active all feature can be configured via the web user interface at the path Home->DND.
  • Page 81 Using the VC400 Video Conferencing System The interface prompts ”Hang up?” Click Confirm to end the call. During a multi-way call, you can remove any party via the remote control or web user interface. To remove any party via the remote control: Press (More soft key) during a multi-way call.

  • Page 82: Call Statistics

    User Guide for the VC400 Video Conferencing System You can enable mute mode, record video, control the video and change video layout during an active call. You can enable mute mode to mute the microphone of the active audio device during an active call, and then the other party cannot hear you.

  • Page 83: Presentation

    You can also start/end presentation during a call via the remote control or VCP40 phone (ensure a PC is connected to the VC400 codec). If you disconnect the PC, the presentation will end automatically.

  • Page 84: Changing The Video Input Source

    ): All video images are shown in the same size.  If one display device is connected to the VC400 codec (single screen), the default screen layout during a call is: If there is one active call and local system does not start the presentation, the ...
  • Page 85 Far end PC presentation Local If two display devices are connected to the VC400 codec (dual screen), the default screen layout during a call is: If there is one active call and local system does not start the presentation. ...
  • Page 86 User Guide for the VC400 Video Conferencing System If there is one active call and local system is sharing the presentation.  In the main display device, the remote video image is shown in big size, the local video image along the right side of the screen is shown in small size.
  • Page 87 Troubleshooting Press to select a video. Press the desired layout soft key. The selected video will be shown in the selected layout. Before placing a video call, you need to be familiar with how to adjust the angle and focus of the camera. After any adjustment, you can long press number keys 0-9 to save the new position of the camera.
  • Page 88 User Guide for the VC400 Video Conferencing System The display device shows the current angle of the camera. Long press to adjust the focus of the camera. The display device shows the focus of the camera. To save the preset of the camera: Press (Preset soft key).
  • Page 89 PC. If two display devices are connected to the VC400 codec, the video image is shown on the main display device, and the presentation on the PC is shown on the second display device.

  • Page 90: Video Recording

    The system only supports USB flash drive in FAT32 format. After the USB flash drive is inserted to the USB port on the VC400 codec, the display device will prompt "USB device available, press * to record or press # to screenshot".
  • Page 91 Troubleshooting The display device shows and the recording time. The LCD screen of the VCP40 phone is shown as below: Press on the remote control or press the Stop REC soft key on the VCP40 phone to stop recording. The recording icon disappears from the screen, and the display device prompts ”Successfully video recording!”.
  • Page 92 The system only supports USB flash drive in FAT32 format. After the USB flash drive is inserted into the USB port on the VC400 codec, the display device will prompt "USB device available, press * to record or press # to screenshot".

  • Page 93: Screenshot

    Troubleshooting To view screenshots via the remote control: Press (Menu soft key) to enter main menu. Press to select the Record menu. Press to scroll to Screenshots, and then press Press to select desired screenshots. Press (View soft key). You can do one of the following: Press to view previous or next screenshot.
  • Page 94 User Guide for the VC400 Video Conferencing System...

  • Page 95: Troubleshooting

    Troubleshooting This chapter provides general troubleshooting information to help you solve problems you might encounter when using your VC400 system. If you require additional information or assistance to help you use your new phone, contact your system administrator. Diagnostic menus include: Audio Diagnose: Check whether the audio output device can pick up voice and ...
  • Page 96 User Guide for the VC400 Video Conferencing System Press (Back soft key) to stop camera diagnostics. Network diagnosis: Press (Menu soft key) to enter main menu. Press to select the Diagnose menu. Press to scroll to Ping, and then press...
  • Page 97 Troubleshooting How to obtain the IP address of the system? Three are three ways to obtain the IP address of the system: The IP address of the system is shown on the top right corner of the display device.  Press (Menu soft key) on your remote control and select Network.
  • Page 98  If you select VCS Phone as the audio output device, ensure that the VCP40 phone is  connected to the VC400 codec, and LED indicators on the phone illuminate solid green. Ensure the proper volume level on the system.
  • Page 99 If you select VCS Phone as the audio output device, ensure that the VCP40 phone is  connected to the VC400 codec, and LED indicators on the phone illuminate solid green. Ensure that the ring volume is not set to 0. If it is, the icon will appear on the ...
  • Page 100 User Guide for the VC400 Video Conferencing System You can reboot the system via the web user interface at the path Setting->Upgrade. How to export PCAP trace? We may need you to provide a PCAP trace to help analyze your problem. Exporting PCAP trace is only configurable via the web user interface.
  • Page 101 Troubleshooting The default system log level is 9. Click Confirm to accept the change. The web user interface prompts “Operating…Please wait…”. Export the system log referring to the following steps. Recreate the error to be documented in the trace. Click Export to save the file to your local system. How to export/import the system configurations? We may need you to provide your system configurations to help analyze problems.
  • Page 102 User Guide for the VC400 Video Conferencing System Click Confirm to export the configurations. To import the phone configurations via the web user interface: Click on Setting->Configuration. Click Browse to locate a configuration file from your local system. Click Import to import the configuration file.
  • Page 103 Troubleshooting The web user interface is shown as below: How to reset the system? Reset the system to factory configurations after you have tried all appropriate troubleshooting suggestions but have still do not solved the problem. You need to note that all customized settings will be overwritten after reset.
  • Page 104 User Guide for the VC400 Video Conferencing System The display device prompts ”Reset to Factory? ” Select OK, and then press The system reboots automatically, the LCD screen of the VCP40 phone prompts ”Rebooting Please wait…”. The phone will be reset to factory sucessfully after startup.

  • Page 105: Regulatory Notices

    Without prior written consent, no organization or individual is permitted to  make any change to the structure or the safety design of the device. Yealink is under no circumstance liable to consequences or legal issues caused by such changes.
  • Page 106 User Guide for the VC400 Video Conferencing System Environmental Requirements Place the device in a well-ventilated place. Do not expose the device to  direct sunlight. Keep the device dry and free of dust.  Place the device on a stable and level platform.

  • Page 107: Restriction Of Hazardous Substances

    This table lists the toxic and hazardous substances contained in the machine. Based on the material type, the data is provided by the supplier and has already been validated by Yealink company. Some harmful substances contained in the material cannot be replaced according to...
  • Page 108 User Guide for the VC400 Video Conferencing System...

  • Page 109: Appendix A - Time Zones

    Appendix A - Time Zones Time Zone Time Zone Name −11:00 Samoa −10:00 United States-Hawaii-Aleutian −10:00 United States-Alaska-Aleutian −09:00 United States-Alaska Time −08:00 Canada(Vancouver, Whitehorse) −08:00 Mexico(Tijuana, Mexicali) −08:00 United States-Pacific Time −07:00 Canada(Edmonton, Calgary) −07:00 Mexico(Mazatlan, Chihuahua) −07:00 United States-Mountain Time −07:00 United States-MST no DST −06:00...
  • Page 110 User Guide for the VC400 Video Conferencing System Time Zone Time Zone Name Portugal(Lisboa, Porto, Funchal) Spain-Canary Islands(Las Palmas) United Kingdom(London) Morocco +01:00 Albania(Tirane) +01:00 Austria(Vienna) +01:00 Belgium(Brussels) +01:00 Caicos +01:00 Chad +01:00 Spain(Madrid) +01:00 Croatia(Zagreb) +01:00 Czech Republic(Prague) +01:00...
  • Page 111 Appendix A - Time Zones Time Zone Time Zone Name +04:00 Kazakhstan(Aktau) +04:00 Russia(Samara) +04:30 Afghanistan +05:00 Kazakhstan(Aqtobe) +05:00 Kyrgyzstan(Bishkek) +05:00 Pakistan(Islamabad) +05:00 Russia(Chelyabinsk) +05:30 India(Calcutta) +06:00 Kazakhstan(Astana, Almaty) +06:00 Russia(Novosibirsk, Omsk) +07:00 Russia(Krasnoyarsk) +07:00 Thailand(Bangkok) +08:00 China(Beijing) +08:00 Singapore(Singapore) +08:00 Australia(Perth) +09:00...
  • Page 112 User Guide for the VC400 Video Conferencing System...

  • Page 113: Index

    Answering or Rejecting Calls General Settings Appendix A - Time Zones Getting Started General Issues Backlight Bandwidth Settings System Component Instructions Customizing VC400 Video Conferencing Icon Instructions System Importing/Exporting Contact lists Call Type In This Guide Call History Management Idle Screen Display...
  • Page 114 User Guide for the VC400 Video Conferencing System Network Connection User Interfaces Navigating Menus on the Display Device Using VC400 Video Conferencing System Packaging Contents V400 Codec Presentation Viewing Call History Placing Calls VCC18 HD Camera Place a call from the call history list...

Table of Contents