Yealink VC400 Administrator's Manual page 210

Administrator's Guide for Yealink Video Conferencing Systems
Parameter
Far Control Near
Camera
Far Set of Camera
Presets
Far Move to
Camera Presets
To configure far-end camera control via web user interface:
Click on Setting->Video & Audio.
1.
Enter the desired time in the Not FECC in call(0~300s) field.
2.
Select the desired values from the pull-down lists of Far Control Near Camera.
3.
Select the desired values from the pull-down lists of Far Set of Camera Presets.
4.
Select the desired values from the pull-down lists of Far Move to Camera Presets.
5.
Click Confirm to accept the change.
6.
194
Description
If it is set to 15, the far site is not
allowed to control the local camera
in the first 15 seconds of the call.
Enables or disables the far site to
control the near site camera.
Default: Enabled
Enables or disables the far site to
store the camera presets.
Default: Disabled
Enables or disables the far site to
use the camera presets.
Default: Disabled
Configuration Method
Remote Control
Web User Interface
Remote Control
Web User Interface
Remote Control
Web User Interface