Yealink VC400 Administrator's Manual page 231

deleted by users. When an LDAP server is configured properly, the system can look up entries
from the LDAP server in a wide variety of ways. The LDAP server indexes all the data in its entries,
and "filters" may be used to select the desired entry or group, and retrieve the desired
information.
Configurations on the system limit the amount of displayed entries when querying from the
LDAP server, and decide how the attributes are displayed and sorted.
Performing a LDAP search on the system:
Enter search content in the dialing screen. (Ensure that the LADP is in the enabled search

source lists)
In the Directory screen, select Company to enter the LDAP search screen, and then enter a

few characters which you want to search.
The system will send the search request to the LDAP server, the LDAP server then performs a
search based on the entered content and configured filter condition, and returns results to the
system.
LDAP Attributes
The following table lists the most common attributes used to configure the LDAP lookup on the
system:
Abbreviation
gn
cn
sn
dn
dc
-
-
mobile
ipPhone
LADP parameters are described below:
Parameter
Enables or disables the LDAP feature
on the system.
LDAP Enable
Default: Disabled
Configures the name attribute for
LDAP Name Filter
LDAP searching.
Name
givenName
commonName
surname
distinguishedName
dc
company
telephoneNumber
mobilephoneNumber
IPphoneNumber
Description
System Management
Description
First name
LDAP attribute is made up from given
name joined to surname.
Last name or family name
Unique identifier for each entry
Domain component
Company or organization name
Office phone number
Mobile or cellular phone number
Home phone number
Configuration Method
Web User Interface
Web User Interface
215