Yealink VC400 Administrator's Manual page 69

Gateway: A gateway is a network point that works as an entrance to another network.

Primary DNS /Secondary DNS: Domain Name System (DNS) servers translates domain

names (for example: www.example.com), which can be easily memorized by humans, to
the numerical IP addresses (192.168.1.15) needed for the purpose of computer services
and devices worldwide.
Network parameters need to be configured manually on the system are described below.
Parameter
Configures the IP address mode.
Default: IPv4
Mode (IPv4/IPv6)
Note: If you change this parameter,
the IP phone will reboot to make the
change take effect.
Enables or disables the system to
use manually configured network
settings.
Default: Disabled
Static IP
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures the IP address assigned
to the system.
Default: Blank
IP Address
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures the subnet mask
assigned to the system.
Default: Blank
Subnet Mask
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures the gateway assigned to
the system.
Default: Blank
Gateway
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Static DNS
Triggers the static DNS feature to on
Description
Configuring Network
Configuration Method
Remote Control
Web User Interface
Remote Control
Web User Interface
Remote Control
Web User Interface
Remote Control
Web User Interface
Remote Control
Web User Interface
Remote Control
53