Yealink VC400 Administrator's Manual page 73

IPv6 Network parameters need to be configured manually on the system are described below.
Parameter
Configures the IP address mode.
Default: IPv4
Mode (IPv4/IPv6)
Note: If you change this parameter,
the IP phone will reboot to make the
change take effect.
Enables or disables the system to
use manually configured IPv6
network settings.
Default: Disabled
Static IP
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures the IPv6 address
assigned to the system.
Default: Blank
IP Address
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures the IPv6 prefix.
Default: Blank
IPv6
Note: If you change this parameter,
prefix((0~128)
the system will reboot to make the
change take effect.
Configures the IPv6 default gateway.
Default: Blank
Gateway
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Triggers the static IPv6 DNS feature
to on or off.
Static DNS/Static
Default: Off
IPv6 DNS
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures the primary IPv6 DNS
DNS Primary
server.
Server/Primary
Description
Configuring Network
Configuration Method
Remote Control
Web User Interface
Remote Control
Web User Interface
Remote Control
Web User Interface
Remote Control
Web User Interface
Remote Control
Web User Interface
Remote Control
Web User Interface
Remote Control
Web User Interface
57