Yealink VC400 Administrator's Manual page 270

Administrator's Guide for Yealink Video Conferencing Systems
SNMP parameters on the system are described below:
Parameter
SNMP->Active
Port
Trusted Address
To configure SNMP via web user interface:
Click on Network->Advanced.
1.
In the SNMP block, select Enabled from the pull-down list of Active.
2.
Enter the SNMP port in the Port field.
3.
254
Description
Enables or disables SNMP feature on
the system.
Default: Disabled
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Specifies the SNMP port.
Valid Values: 1-65535
Default: 161
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures IP address(es) or domain
name of the trusted SNMP server.
Multiple IP addresses or domain
names should be separated by
spaces.
Note: If it is left blank, the system
accepts and handles GET requests
from any SNMP server.
If you change this parameter, the
system will reboot to make the
change take effect.
Configuration Method
Web User Interface
Web User Interface
Web User Interface