Administrator's Guide for Yealink Video Conferencing Systems
Parameter
Primary DNS
Secondary DNS
To configure the IP address mode via web user interface:
Click on Network->LAN Configuration.
1.
Select desired value from the pull-down list of IPv4/IPv6.
2.
Click Confirm to accept the change.
3.
A dialog box pops up to prompt that settings will take effect after a reboot.
54
Description
or off.
Default: Off
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures the primary DNS server
assigned to the system.
Default: Blank
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configures the secondary DNS
server assigned to the system.
Default: Blank
Note: If you change this parameter,
the system will reboot to make the
change take effect.
Configuration Method
Web User Interface
Remote Control
Web User Interface
Remote Control
Web User Interface