Yealink VC400 Administrator's Manual page 59

Press (Next soft key) to continue or press
8.
the previous screen.
The display device displays firewall port mapping information.
Press (Next soft key) to continue or press
9.
the previous screen.
10. Configure network settings.
The phone will try to contact a DHCP server in your network to obtain network parameters
by default. If you uncheck the DHCP checkbox, you will need to configure IPv4 or IPv6
network manually. For more information, refer to
11. Press (Next soft key) to continue or press
(Previous soft key) to return to
(Previous soft key) to return to
Configuring LAN Properties
(Previous soft key) to return to
Getting Started
on page 48.
43