Yealink VC400 Administrator's Manual page 79

TLV Type
End of LLDPDU
System Name
System Description
Optional TLVs
System Capabilities
Port Description
IEEE Std 802.3
MAC/PHY
Organizationally
Configuration/Status
Specific TLV
Media Capabilities
TIA
Organizationally
Network Policy
Specific TLVs
Extended
Power-via-MDI
Inventory – Hardware
Revision
TLV Name
The default value is 180s.
Marks end of LLDPDU.
Name assigned to the system.
The default value is "VCS".
Description of the system.
Description includes firmware version of the
system.
The supported and enabled system
capabilities.
The Telephone capability is supported and
enabled by default.
Description of port that sends data unit.
The default value is "WAN PORT".
Duplex mode and network speed settings of
the system.
The Auto Negotiation is supported and
enabled by default.
The advertised capabilities of PMD.
Auto-Negotiation is:
1000BASE-T (full duplex mode)
100BASE-TX (full duplex mode)
100BASE-TX (half duplex mode)
10BASE-T (full duplex mode)
10BASE-T (half duplex mode)
The MED device type of the system and the
supported LLDP-MED TLV type can be
encapsulated in LLDPDU.
The supported LLDP-MED TLV types are:
LLDP-MED Capabilities, Network Policy,
Extended Power via MDI-PD, Inventory.
Port VLAN ID, application type, L2 priority
and DSCP value.
Power type, source, priority and value.
Hardware revision of the system.
Configuring Network
Description
63