Retrieving [Job Memory]; Changing The Name Of [Job Memory]; Erasing [Job Memory] - Riso 9450 User Manual

86
Chapter 5 Useful Functions
BWhen you want to change the set-
ting of any function, touch [Cancel]
and then [Close] to go back to the
basic screen. Then revise the set-
ting of the function.
5
Touch [OK].
The [Job Memory] screen is displayed.
6
Touch [Close].
The basic screen is displayed.

Retrieving [Job Memory]

1
Touch [Job Memory] in the [Func-
tions] tab screen.
The [Job Memory] screen is displayed.
BYou can also display the [Job Mem-
ory] screen by pressing the [U] key.
2
Touch [Retrieve].
3
Touch the button for the settings
that you want to retrieve.
The [Status Check] screen is displayed.
BYou can also display the [Status
Check] screen by pressing the
numeric keys corresponding to the
relevant memory number.
CNumbers [1] to [9]: Press the cor-
CNumber [10]: Press the "0" key.
4
Check the settings.
5
Touch [OK].
The settings are applied and then the basic
screen is displayed.
responding key from "1" to "9".

Changing the name of [Job Memory]

1
Touch [Job Memory] in the [Func-
tions] tab screen.
The [Job Memory] screen is displayed.
BYou can also display the [Job Mem-
ory] screen by pressing the [U] key.
2
Touch [Rename].
3
Touch the button whose name you
want to change.
4
Change the name.
(A 24 "[Rename] screen")
5
After entering a new name, touch
[OK].
The [Job Memory] screen is displayed.
BIf the name does not fit in the dis-
play area, the latter part of the name
is displayed as "...".
6
Touch [Close].
The basic screen is displayed.

Erasing [Job Memory]

1
Touch [Job Memory] in the [Func-
tions] tab screen.
The [Job Memory] screen is displayed.
BYou can also display the [Job Mem-
ory] screen by pressing the [U] key.