118
Chapter 7 Setting the Operation Conditions
3
Touch the authentication method
to be used.
B[IC Card] is displayed when the
optional IC Card Reader is installed.
A confirmation screen is displayed.
4
Touch [OK].
[Management Level]
Set the type of authentication.
BSet [Recognized by] in advance.
1
Touch [Management Level] in the
[User Management] screen.
To display the [User Management] screen, per-
form steps 1 to 3 in [Recognized by]
2
Touch the type of authentication
method to be used.
■ [High/Full Management]
Both "Machine authentication" and "ID print"
are available.
■ [Mid/ID Print Only]
Only "ID print" is available.
■ [Low/Admin Tab Only]
Neither "Machine authentication" nor "ID print"
is available.
The operation of [Admin.] is limited to only the
administrator.
3
Touch [OK].
(A
117).