Functions For Scanning - Riso 9450 User Manual

100
Chapter 6 Functions for Scanning

Functions for Scanning

For the details and setting procedure of each func-
tion, see the pages that are specified as a refer-
ence.
■ Functions for setting basic information
[File Name] (A
You can set the storage data name that is to be dis-
played.
The name of the storage data is displayed in the
[Storage Selection] screen or the [USB Job List]
screen.
[Directory] (A 101)
You can specify the folder into which the data is to
be saved in [Storage] or [USB].
[Owner] (A 102)
You can set the name of the owner of the storage
data.
The name of the storage data is displayed in the
[Storage Selection] screen or the [USB Job List]
screen.
■ Functions related to image processing
[Image] (A 45)
You can set the processing that is suitable for the
type of original.
[Dot Process] (A
You can set the processing method to express the
gradation of a photo.
[Contrast Adj] (A
You can change a blurry photo to a sharp final out-
put.
[Tone Curve] (A
You can adjust the tone of bright parts and dark
parts in originals such as a photo.
101)
47)
47)
48)
[Contrast] (A 48)
You can adjust the contrast according to the paper
color and the tint of the original.
[Book Shadow] (A 49)
You can erase or reduce the shadow in the binding
section of books.
■ Functions related to layout
[Size] (A 51)
You can enlarge or reduce the size of the original.
[Format] (A 103)
You can select the paper size of the storage data.
[Multi-Up Print] (A 54)
You can lay out multiple originals on a single sheet
of paper.
[2 Up] (A 58)
You can lay out two copies of originals side by side
on a single sheet of paper.
■ Other functions
[Preview] (A 61)
You can check the output image before saving.