Setting [Multi; Canceling [Program]; Registering [Program] - Riso 9450 User Manual

82
Chapter 5 Useful Functions
Setting [Multi-Page Mode]
1
Touch [Program] in the [Functions]
tab screen.
The [Program Type] screen is displayed.
BYou can also display the [Program
Type] screen by pressing the [P]
key.
2
Touch [Multiple].
3
Enter a value in [Cps.] using the
numeric keys.
You can enter a value into the active entry field.
4
Change the target for entry to the
next field.
• Press the [+] key or the [U] key.
• It is also possible to select the entry field by
directly touching the target.
Repeat steps 3 to 4 as necessary.
BTo clear all entered values, touch
[Clear All].
BThe total of the entered number of
copies is displayed at the top of the
screen.
BIf you want to register the pro-
grams that are set in this screen,
touch [Entry/Call] before [OK].
Then, go to step 3 in "Registering
[Program]" (A 82).
5
Touch [OK].
The basic screen is displayed.
When you press the [START] key, printing can
be performed according to the program that
you set.
BPrinting is performed in the reverse
order of registration from the last
original. (Example: [Page 03] ->
[Page 02] -> [Page 01])
In this case, [Page 01] is output on
the top of the printed paper in the
paper receiving tray.

Canceling [Program]

1
Touch [Program] in the [Functions]
tab screen.
The [Program Type] screen is displayed.
BYou can also display the [Program
Type] screen by pressing the [P]
key.
2
Touch [Cancel Job].
3
Touch [OK].

Registering [Program]

It is useful if you register a program that is used fre-
quently.
You can register a total of 12 [Single Page Mode] and
[Multi-Page Mode] programs.
1
Set a program.
Perform either of the following settings.
• Steps 1 to 6 in "Setting [Single Page Mode]"
(A 81)
• Steps 1 to 4 in "Setting [Multi-Page Mode]"
(A 82)