When [Auto Process] Is Set To Other Than [On] - Riso 9450 User Manual

BWhen [ID print] is set in step 5, refer
to the page below to perform the
necessary operation.
(A 36 "When [ID print] is set")
BAn idling action (to ensure the ink
usability and stability) may be auto-
matically executed. You can change
the setting in [Auto Idling] under
[Admin.] (A
When [Auto Process] is set to other
than [ON]
The operation varies depending on the [Auto Process]
setting that is selected in the printer driver.
■ When [Pause before "Master-making"] is
selected
The operation pauses before master making of each
page. After master making, the printing process is per-
formed automatically.
1
Check that the master making
basic screen is displayed.
If a screen other than the master making basic
screen is displayed, press the [MASTER MAK-
ING] key (A 21).
BWhen the [Job List] screen is dis-
played, go to step 3.
2
Touch [Pause].
3
Touch [Output].
110).
4
Check the master making condi-
tions.
(A 22 "Touch Panel Displays")
5
Press the [START] key.
After master making, the printing process
starts. Operation does not pause after a proof
copy has been output.
After the printing process is complete, the oper-
ation pauses and then master making of the
next page starts. Repeat steps 4 to 5 for each
page.
■ When [Pause before "Print"] is selected
After master making of each page is performed auto-
matically, a proof copy is output, and then the opera-
tion pauses.
1
Check the printing conditions.
Check the printing position and density on the
proof copy. Perform the required settings as
necessary.
2
Press the [START] key.
The printing process starts. After the printing
process is complete, master making of the next
page starts. After outputting a proof copy, the
operation pauses. Repeat steps 1 to 2 for each
page.
■ When [OFF] is selected
Before the master making process and before the
printing process of each page, the operation pauses.
1
Perform steps 1 to 3 in "When
[Pause before "Master-making"] is
selected".
2
Check the master making condi-
tions.
(A 22 "Touch Panel Displays")
Chapter 2 Basic Operations
35
2