When [Id Print] Is Set - Riso 9450 User Manual

36
Chapter 2 Basic Operations
3
Press the [START] key.
Master making starts. After master making is
complete, a proof copy is output and then the
operation pauses.
4
Check the printing conditions.
Check the printing position and density on the
proof copy. Perform the required settings as
necessary.
5
Press the [START] key.
The printing process starts. After the printing
process is complete, the operation pauses and
then master making of the next page starts.
Repeat steps 2 to 5 for each page.

When [ID print] is set

1
Check that the master making
basic screen is displayed.
If a screen other than the master making basic
screen is displayed, press the [MASTER MAK-
ING] key (A 21).
BWhen the [Job List] screen is dis-
played, go to step 3.
2
Touch [Pause].
3
Touch [ID Print Job].
Perform job identification according to the
instructions on the screen.
BIf there are only jobs set with [ID
Print], the screen in step 3 will not
be displayed. Go to step 4.
4
Touch [Output].