Paper Receiving Side - Riso 9450 User Manual

Paper receiving side

1
2
6
7
8
9
0
1 Master making unit cover
2 Master guide flap (A
3 Thermal print head (A
4 Master roll holder (A
Secures a master roll that is set.
5 Master roll (A 133)
6 Master making unit (A
See numbers 1 to 5.
7 Front door (A 133)
8 Print drum (cylinder)
9 Ink cartridge (A 136)
0 Print drum (cylinder) handle
Grip this handle to pull out the print drum (cylinder).
a Master making unit handle
Grip this handle to pull out the master making unit.
b Print Drum (Cylinder) Release Button
(A 139)
You can pull out the print drum (cylinder) while this
button is lit.
When the button is not lit, press the button to light it
up and then pull out the print drum (cylinder).
3
4
5
a b c d
(A 134)
134)
144)
134)
133)
(A 139)
(A 139)
(A 133)
e
c Master Making Unit Release Button
You can pull out the master making unit while this
button is lit.
When the button is not lit, press the button to light it
up and then pull out the master making unit.
d Stabilizer
e Power switch (A 32)
Turns on / off the power supply.
f Paper receiving tray
The printed paper is output to this tray.
g Paper stopper (A 29)
Slide this stopper to fit the paper size.
h Receiving-tray paper guides
Slide these guides to fit the paper size.
i Paper arranger knob
Press this knob to open the paper arranger.
The paper arranger helps improve the arrangement
state of the printed paper.
j Paper jumping wing
k USB slot (A 41)
Insert a USB flash drive for authentication or printing.
Chapter 1 About This Machine
k
j
i
h
g
f
(A 133)
(A 29)
(A 29)
(A 29)
(A 77)
19
1