Enter The User Name - Riso 9450 User Manual

120
Chapter 7 Setting the Operation Conditions
■ When using USB flash drive
Insert a USB flash drive that is to be registered
for authentication.
The number specific to the USB flash drive is
displayed (you cannot change this number).
■ When using IC card
Hold the IC card to be registered for authentica-
tion over the reader.
The number specific to the IC card is displayed
(you cannot change this number).
4
Set the user information.
Set the following items as necessary.
■ [Rename]
You can change the user name. The name that
is set here will be displayed in "USERNAME" in
the CSV file that is saved in [ID Counter
Report] (A
(A 120 "Changing the user name")
■ [Group]
You can set the group (department, etc.) to
which the user belongs. Once this item is set,
the total count for each group is displayed in
the CSV file that is saved in [ID Counter
Report] (A
(A 120 "[Group]")
■ [Limit]
You can set the upper limit of the number of
copies that the user can use for master making
or printing.
(A 121 "Setting the upper limit number of cop-
ies that can be used")
■ [Disable]
You can prohibit the use of this machine by
specific users.
91).
91).
(A 121 "Temporarily disabling the usage of this
machine")
5
Touch [OK].
Remove the USB flash drive for authentication,
if it is inserted.
When registration is complete, provide the fol-
lowing items to the user.
■ When [Recognized by] is set to [PIN
Code]
• Authentication registration number
• PIN code
■ When [Recognized by] is set to
[USB Flash Drive] or [IC Card]
• Authentication registration number
• USB flash drive for authentication or IC card
BThe authentication registration num-
ber is required for using [ID print].
■ Changing the user name
1
Touch [Rename].
2

Enter the user name.

(A 24 "[Rename] screen")
3
Touch [OK].
The [Register] screen is displayed.
■ Setting the group
1
Touch [Group].
2
Touch the group that you want to
set.
BIf no group is to be set, touch [OFF].
3
Touch [OK].
The [Register] screen is displayed.