Printing Area; Materials Not To Be Printed - Riso 9450 User Manual

16
■ Paper storage
Store paper in a dry area. Paper containing moisture
can result in paper jams or poor print quality.
■ Inappropriate paper for printing
Do not use the types of paper listed below, as it can
result in a paper jam.
• Extremely thin paper
(less than 46 g/m
• Extremely thick paper
(greater than 210 g/m
• Chemically treated paper (such as thermal or carbon
paper)
• Excessively wrinkled, curled, creased, or torn paper
• Paper coated on one side or both sides
• Deckle-edged paper
• Art paper
• Paper with sticky areas or holes
■ Direction of paper
The leading edge in the paper feeding direction is
referred to as the "top" in this guide.

Printing area

■ Maximum Printing Area
The maximum printing area of this machine is as fol-
lows:
Model
SF9450
SF9350
SF9250
2
[12-lb bond])
2
[116-lb index])
(Top)
Maximum printing area
291 mm × 425 mm
(11 15/32 inches × 16 23/32
inches)
291 mm × 413 mm
(11 15/32 inches × 16 1/4 inches)
251 mm × 357 mm
(9 7/8 inches × 14 1/16 inches)
■ Master making area
The master making area is determined according to
the paper size placed on the paper feed tray. The
master making area is an area that equals the paper
size excluding the margin shown in the illustration
below.
2mm (3/32 inches)
Master making area
Paper feeding direction
* These values are for cases when using standard size
paper. When using custom size paper, these values are
5 mm (3/16 inches).
When creating originals, take above margins into con-
sideration.
The same master making area is applied when print-
ing by sending original data from a computer.
BThe master making area does not
exceed the maximum printing area even
when you set large paper.
BEven when you set [Max. Scan]
master making is not performed within
the area of 5 mm (3/16 inches) from the
paper edge.
BWhen printing an original with little margin
around the original, it is useful to reduce
the original by setting [Margin+]
BYou can set [Max. Scan]
the master making area up to the maxi-
mum printing area, regardless of the paper
size.

Materials not to be printed

Do not use this machine in any manner which violates
the laws or infringes on established copyrights, even
when making copies for personal use. Consult your
local authorities for further details. In general, use dis-
cretion and common sense.
5mm (3/16 inches)
3mm *
(1/8 inches)
3mm *
(1/8 inches)
(A 54),
(A 51).
(A 54) to enlarge