Technical Specifications Of The Em 4 F-Di/3 F-Do Dc24V Profisafe - Siemens PM-E F pm DC24V PROFIsafe Installation And Operating Manual

Generally applicable information on diagnostics
For information on diagnostics that affects all fail-safe modules (such as readout of
diagnostic functions; passivation of channels) see this manual in
S7 Distributed Safety, Configuration and Programming
Configuring and Programming
See also
Fault Diagnostics (Page 43)
7.6.8

Technical specifications of the EM 4 F-DI/3 F-DO DC24V PROFIsafe

Overview
Dimensions and Weight
Dimensions W x H x D (mm)
Weight
Data for Specific Module
Number of inputs
•
Number of outputs (P/M switching)
Assigned address area
•
•
Length of cable
•
•
Maximum achievable safety class
•
•
•
Fail-safe performance characteristics
•
•
•
Voltages, Currents, Potentials
Rated supply voltage L+
•
ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07
7.6 EM 4 F-DI/3 F-DO DC24V PROFIsafe digital electronic module
2-channel
I/O area for inputs
I/O area for outputs
Unshielded *
Shielded *
In accordance with IEC 61508
In accordance with EN 954
In accordance with ISO 13849
Low demand mode (average probability of
failure on demand)
High demand/continuous mode (probability of
a dangerous failure per hour)
Acceptance ID
permissible range **
.
Technical Specifications
30 x 81 x 52
Approx. 73 g
4, maximum
3, maximum
7 bytes
5 bytes
30 m, maximum
30 m, maximum
SIL2
Category 3
PLd
SIL2
< 1.00E-04
< 1.00E-08
cULus, FM, ATEX, CE, C-Tick
24 VDC
20.4 V to 28.8 V
Fail-Safe Modules
"Diagnostics"
S7 F/FH Systems,
manual or
and the
159