Technical Specifications Of The Pm-D F Dc24V Profisafe - Siemens PM-E F pm DC24V PROFIsafe Installation And Operating Manual

Et 200s distributed i/o system - fail-safe modules
Table of Contents

Advertisement

7.4.6

Technical Specifications of the PM-D F DC24V PROFIsafe

Overview
Dimensions and Weight
Dimensions W x H x D (mm)
Weight
Data for Specific Module
Number of outputs (P/P switching)
Internal power supply for bus
Assigned address area
Maximum achievable safety class
Fail-safe performance characteristics
Voltages, Currents, Potentials
Rated supply voltage L+
Total current of outputs
Electrical isolation
Permissible potential difference between
ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07
In the I/O area for inputs
In the I/O area for outputs
according to IEC 61508, according to EN 954,
according to ISO 13849
Low demand mode (average probability of
failure on demand)
High demand/continuous mode (probability of
a dangerous failure per hour)
Acceptance ID
permissible range *
Power loss ride-through of L+
Power loss ride-through of internal P5
Reverse polarity protection
Horizontal installation
Up to 40 °C
Up to 60 °C
Vertical installation
Up to 40 °C
Between channels and backplane bus
Between channels and power supply
Between channels
Between channels/power supply and shield
7.4 PM-D F DC24V PROFIsafe Power Module
Technical Specifications
30 x 196.5 x 117.5
Approx. 112 g
6 shutdown groups (SG 1 through SG 6)
U 1
5 bytes
5 bytes
SIL3, category 4, PLe
SIL3
< 1.00E-05
< 1.00E-10
CE, UL, CSA
24 VDC
21.6 V to 26.4 V
None
5 ms
No
Brief/permanent
10 A/5 A
10 A/4 A
Brief/permanent
10 A/4 A
Yes
No
No
Yes
Fail-Safe Modules
103

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents