Siemens PM-E F pm DC24V PROFIsafe Installation And Operating Manual page 213

F-I/O
Group designation for fail-safe inputs and outputs available in
in the S7 Distributed Safety and S7 F/FH Systems fail-safe systems. Available F-I/O
modules:
● Fail-safe I/O module for ET 200eco
● S7-300 fail-safe signal modules (F-SMs)
● Fail-safe modules for ET 200S
● Fail-safe DP standard slaves (for S7 Distributed Safety only)
● fail-safe PA field devices
● fail-safe IO devices
F-Systems
-> Fail-safe systems
Interconnecting
Refers to the opening of a new voltage group by a power module.
This allows individual grouping of sensor and load supplies.
IO controller
-> PROFINET IO controller
IO device
-> PROFINET IO device
Module fault
Module faults can be external faults (e.g. missing load voltage) or internal faults (e.g.
processor failure). Internal faults always require module replacement.
Monitoring time
-> PROFIsafe monitoring time
Motor starter (MS)
Motor starter is a generic term for direct and reversing starters. Motor starters are used to
determine motor startup and the direction of rotation.
ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07
Glossary
SIMATIC S7
for the integration
213