Technical Specifications - Siemens SIMATIC ET 200AL Manual

Technical specifications

Technical specifications of the DQ 8x24VDC/2A 8xM12 IO-Link digital output module
The following table shows the technical specifications as of the issue date. You can find a
data sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/de/en/pv/6ES7142-5AF00-0BL0/td?dl=en).
Article number
General information
Product type designation
HW functional status
Firmware version
Engineering with
•
Supply voltage
Load voltage 1L+
•
•
•
•
Load voltage 2L+
•
•
•
•
Input current
Current consumption (rated value)
from load voltage 2L+, max.
Power loss
Power loss, typ.
Digital outputs
Number of digital outputs
Short-circuit protection
•
Switching capacity of the outputs
•
20
IODD file
Rated value (DC)
permissible range, lower limit (DC)
permissible range, upper limit (DC)
Reverse polarity protection
Rated value (DC)
permissible range, lower limit (DC)
permissible range, upper limit (DC)
Reverse polarity protection
Response threshold, typ.
on lamp load, max.
6ES7142-5AF00-0BL0
IO-Link DQ 8x24VDC/2A
FS01
V1.0.x
Yes
24 V; Supply from 1Us+ of the IO-Link master
18 V
30 V
Yes; against destruction
24 V; Supply via M12 connector L-coded
20.4 V
28.8 V
Yes; against destruction; load increasing
12 mA; without load
8 A; Maximum value
3.6 W
8
Yes; per channel, electronic
2.8 A
10 W
IO-Link digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BL0)
Equipment Manual, 08/2021, A5E47926730-AB
6