Siemens PM-E F pm DC24V PROFIsafe Installation And Operating Manual page 87

The SF LED and the status displays of the inputs/outputs are not designed for safety-
related functions and may therefore not be evaluated for safety-related activities.
Terminal Assignment
The following figure and the following table show the terminal assignment of the PM-
E F pp DC 24V PROFIsafe for the supported terminal modules TM-P30S44-A0 or TM-
P30C44-A0.
Figure 7-10
Table 7- 7
Terminal
2
3
A
4
6
7
A
8
ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07
WARNING
Terminal assignment TM-P30S44-A0 or TM-P30C44-A0 for PM-E F pp DC 24V
PROFIsafe
Terminal assignment of the TM-P30S44-A0 or TM-P30C44-A0
Designation
24 VDC 24 VDC rated load voltage for:
Inserted power module
•
Corresponding voltage group and
•
Voltage bus P2
•
M Ground
AUX 1 Any terminal for PE or voltage bus up to the maximum rated load voltage of
the module
24 VDC 24 VDC rated load voltage for:
Inserted power module
•
Corresponding voltage group and
•
Voltage bus P2
•
M Ground
AUX 1 Any terminal for PE or voltage bus up to the maximum rated load voltage of
the module
7.3 PM-E F pp DC24V PROFIsafe power module
Fail-Safe Modules
87