Siemens PM-E F pm DC24V PROFIsafe Installation And Operating Manual page 134

Fail-Safe Modules
7.5 4/8 F-DI DC24V PROFIsafe Digital Electronic Module
•
•
Permissible potential difference between
•
•
•
Isolation in the series tested with
•
•
•
Isolation in the type test tested with
•
•
•
•
Current consumption
•
•
Power dissipation of the module
Status, Interrupts, Diagnostics
Status display
Inputs
Sensor supply
Diagnostic functions
•
•
Sensor Supply Outputs
Number of outputs
Output voltage
•
Output current
•
•
Permissible total current of outputs
Short-circuit protection
•
Data for selecting a sensor ***
Input voltage
•
•
•
134
Between channels
Between channels/power supply and shield
Shield and ET 200S bus connection
Shield and I/O (DIs, P1/P2 buses)
ET 200S bus connection and I/O (DIs, P1/P2
buses)
Shield and ET 200S bus connection
Shield and I/O (DIs, P1/P2 buses)
ET 200S bus connection and I/O (DIs, P1/P2
buses)
Shield and ET 200S bus connection
Shield and I/O (DIs, P1/P2 buses)
ET 200S bus connection and I/O (DIs, P1/P2
buses)
Surge voltage test between ET 200S bus
connection and I/O (DIs, P1/P2 bus)
From backplane bus
From load voltage L+ (without load)
Group fault display
Diagnostic information can be displayed
Loaded
Rated value
Permissible range
Operating value
Rated value
For "1" signal
For "0" signal
Technical Specifications
No
Yes
75 VDC/60 VAC
75 VDC/60 VAC
250 VAC
500 VDC/1 min or 600 VDC/1 s
500 VDC/1 min or 600 VDC/1 s
1500 VAC/1 min or 2545 VDC/1 s
350 VAC/1 min
350 VAC/1 min
2830 VAC/1 min
6000 VDC/5 positive and 5 negative pulses
28 mA, typical
120 mA, typical
4 W, typical
Green LED per channel
Red LED per channel
Red LED (SF)
Possible
2
Minimum L+ (-1.5 V)
300 mA
0 mA to 300 mA
600 mA
Yes, electronic
0.7 A to 1.8 A
24 VDC
15 V to 30 V
-30 V to 5 V
ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07