Configuring and Managing VSANs
Deleting Static VSANs
You can delete a VSAN and its various attributes.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
About Load Balancing
Load-balancing attributes indicate the use of the source-destination ID (src-dst-id) or the originator exchange
OX ID (src-dst-ox-id, the default) for load-balancing path selection.
Configuring Load Balancing
You can configure load balancing on an existing VSAN.
Load-balancing attributes indicate the use of the source-destination ID (src-dst-id) or the originator exchange
OX ID (src-dst-ox-id, the default) for load-balancing path selection.
OL-27932-01
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
vsan database
Example:
switch(config)# vsan database
switch(config-vsan-db)#
vsan vsan-id
Example:
switch(config-vsan-db)# vsan 2
switch(config-vsan-db)# no vsanvsan-id
Example:
switch(config-vsan-db)# no vsan 5
switch(config-vsan-db)# end
Example:
switch(config-vsan-db)# end
Cisco Nexus 6000 Series NX-OS SAN Switching Configuration Guide, Release 6.x
Guidelines and Limitations for VSANs
Purpose
Enters global configuration mode.
Configures the VSAN database.
Places you in VSAN configuration
mode.
Deletes VSAN 5 from the database and
switch.
Places you in EXEC mode.
75