Mount - HP A7500 Series Command Reference Manual

#
sysname Sysname
#
---- More ----

mount

Syntax
mount device
View
User view
Default level
3: Manage level
Parameters
device: Name of a storage medium (for example flash or cf).
Description
Use the mount command to mount a hot swappable storage medium, such as a CF card (excluding flash).
This command is effective only when the device is in unmounted state.
By default, a storage medium is automatically mounted and in the mounted state after connected to the
device, which means you can use it without mounting it.
Do not remove the storage medium or swap a card when mounting or unmounting the device, or when
you are processing files on the storage medium. Otherwise, the file system could be damaged.
When a storage medium is connected to a lower version system, the system may not be able to recognize
the device automatically, and you need to use the mount command for the storage medium to function
normally.
Before removing a mounted storage medium from the system, you should first unmount it to avoid
damaging the device.
Related commands: umount.
Examples
In standalone mode
1.
# Mount a CF card of the active MPU.
<Sysname> mount cf:
% Mount cf: successfully.
%Apr 23 01:50:00:628 2011 Sysname VFS/4/LOG:
cf: mounted into slot 4.
# Mount a CF card of the standby MPU (in slot 1).
<Sysname> mount slot1#cf:
% Mount slot1#cf: successfully.
%Apr 23 01:50:00:628 2011 Sysname VFS/5/LOG:
cf: mounted into slot 1.
In IRF mode
2.
# Mount a CF card of the master.
90