HP A7500 Series Command Reference Manual page 171

Table 20 Output description (in standalone mode)
Field
Slot No.
Brd Type
Brd Status
Subslot Num
Soft Ver
Patch Ver
# In IRF mode, display information about all member switches in the IRF fabric.
<Sysname> display device
Chassis Slot Type
1 0 LSQ1SRP1CB
1 1 NONE
1 2 LSQ1TGX2SD
1 3 NONE
1 4 LSQ1FV48SA
2 0 LSQ1SRP2XB
2 1 LSQ1SRP2XB
2 2 LSQ1FV48SA
2 3 LSQ1FV48SA
2 4 LSQ1TGX2SD
2 5 SRP2XBSLAVE
2 6 SRP2XBSLAVE
The output shows that the IRF fabric comprises two member switches with member IDs 1 and 2. The card
in slot 0 on member switch 1 is the active MPU for the IRF fabric. The cards in slot 0 and slot 1 of member
switch 2 are standby MPUs for the IRF fabric.
Table 21 Output description (in IRF mode)
Field
Chassis
Slot
Type
Description
Card slot number
Hardware type of a card
Card status:
•
Slave—The card is a standby MPU.
•
Master—The card is an active MPU.
•
Absent—No card is in the slot.
•
Fault—The card is in an error condition.
•
Normal—The card is operating normally.
Maximum number of subcards that the card supports
Software version running on the card
Version of the patch running on the card. None indicates that no patch
is on the card.
State Subslot
Master 0
Absent 0
Normal 0
Absent 0
Normal 0
Slave 0
Slave 0
Normal 0
Normal 0
Normal 0
Normal 0
Normal 0
Description
Member ID of the switch
Slot number of the card on the member switch
Card type
164
Soft Ver Patch Ver
A7500-6626 None
NONE None
A7500-6626 None
NONE None
A7500-6626 None
A7500-6626 None
A7500-6626 None
A7500-6626 None
A7500-6626 None
A7500-6626 None
A7500-6626 None
A7500-6626 None