Display Users - HP A7500 Series Command Reference Manual

Field
total UI in use

display users

Syntax
display users [ all ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays information about all user interfaces that the device supports.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display users command to display information about the user interfaces that are being used.
Use the display users all command to display information about all user interfaces supported by the
device.
Examples
# Display information about the user interfaces that are being used.
<Sysname> display users
The user application information of the user interface(s):
Idx UI
+ 18 VTY 0
19 VTY 1
Following are more details.
VTY 0 :
Location: 192.168.1.54
VTY 1 :
Location: 192.168.1.58
+ : Current operation user.
F : Current operation user work in async mode.
The output shows that two users have logged in to the device. The one with IP address 192.168.1.54 uses
VTY 0, and the other with IP address 192.168.1.58 uses VTY 1.
Delay Type Userlevel
00:00:00 TEL 3
00:02:34 TEL 3
Description
Total number of user interfaces in use
23