HP A7500 Series Command Reference Manual page 186

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display transceiver command to display the key parameters of transceiver modules.
Examples
# Display the key parameters of the transceiver module in interface GigabitEthernet 2/0/3.
<Sysname> display transceiver interface gigabitethernet 2/0/3
GigabitEthernet2/0/3 transceiver information:
Transceiver Type
Connector Type
Wavelength(nm)
Transfer Distance(m)
Digital Diagnostic Monitoring : YES
Vendor Name
Ordering Name
Table 28 Output description
Field
transceiver information
Transceiver Type
Connector Type
Wavelength(nm)
Transfer distance(xx)
Digital Diagnostic Monitoring
Vendor Name
Ordering Name
: 1000_BASE_SX_SFP
: LC
: 850
: 550(50um),270(62.5um)
: HP
: JD118B
Description
Transceiver module information
Transceiver module type
Connector type options:
•
SC—Fiber connector developed by NTT
•
LC—1.25 mm/RJ-45 fiber connector developed by Lucent
•
RJ-45
•
CX 4
•
Fiber transceiver: central wavelength (in nm) of the transmit
laser. If the transceiver supports multiple wavelengths, every
two wavelength values are separated by a comma.
•
Copper transceiver: displayed as N/A.
Transfer distance, with xx representing km for single-mode
transceiver modules and m for other transceiver modules. If the
transceiver module supports multiple transfer media, every two
transfer distance values are separated by a comma. The
corresponding transfer medium is included in the bracket
following the transfer distance value. The following are the
supported transfer media:
•
9 um—9/125 um single-mode fiber
•
50 um—50/125 um multi-mode fiber
•
62.5 um—62.5/125 um multi-mode fiber
•
TP—Twisted pair
•
CX4—CX4 cable
Support for the digital diagnosis function:
•
YES—supported
•
NO—not supported
Vendor name
Product code
179