Command-Privilege - HP A7500 Series Command Reference Manual

alias: Specifies the command alias, which cannot be the same as the first keyword of an existing
command.
Description
Use the command-alias mapping command to configure command aliases.
Use the undo command-alias mapping command to delete command aliases.
By default, a command has no alias.
The configured alias takes effect only after you enable the command alias function.
Examples
# Configure command aliases by specifying show to replace the display keyword.
<Sysname> system-view
[Sysname] command-alias mapping display show
After configuring the command aliases, the display commands have their aliases. For example, if the
original command is display clock, now its alias is show clock and you can input the alias to view the
system time and date.
# Delete the command aliases by canceling the replacement of the display keyword.
<Sysname> system-view
[Sysname] undo command-alias mapping display

command-privilege

Syntax
command-privilege level level view view command
undo command-privilege view view command
View
System view
Default level
3: Manage level
Parameters
level level: Command level, in the range of 0 to 3.
view view: Specifies a view. The value shell represents a user view. The view argument must be the view
where the command resides.
command: Command to be set in the specified view.
Description
Use the command-privilege command to assign a level for the specified command in the specified view.
Use the undo command-privilege view command to restore the default.
By default, each command in a view has a specified level.
Command levels include four privileges: visit (0), monitor (1), system (2), and manage (3). You can
assign a privilege level according to the user's need. When logging in to the switch, the user can access
the assigned level and all levels below it.
2