Display Device Manuinfo - HP A7500 Series Command Reference Manual

Field
State
Subslot
Soft Ver
Patch Ver

display device manuinfo

Syntax
In standalone mode:
display device manuinfo [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
In IRF mode:
display device manuinfo [ chassis chassis-number [ slot slot-number ] ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
3: Manage level
Parameters
chassis chassis-number: Displays the electronic label data for an IRF member switch. The chassis-number
argument represents the IRF member ID of the switch. If no member switch is specified, the command
displays the electronic label data for all member switches. (In IRF mode)
slot slot-number: Displays the electronic label data for a card. The slot-number argument represents the
slot number of the card. If no card is specified, the command displays the electrical label data for all
cards.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display device manuinfo command to display electronic label data.
Description
Status of the card:
•
Absent—No card is in the slot.
•
Master—The card is the active MPU for the IRF fabric.
•
Slave—The card is a standby MPU for the IRF fabric.
•
Normal—The card is operating normally.
•
Fault—The card is in an error condition.
Maximum number of subcards that the card supports
Software version running on the card
Version of the patch running on the card. None indicates that no patch is on the
card.
165