The configurations are displayed in the order of global, port, and user interface. The More prompt
indicates that there are more line that the screen can display. Pressing Enter displays the next line;
pressing Space displays the next screen; pressing Ctrl+C or any other key exits the display.
# Display the contents of the startup configuration file of the device with a number identifying each line.
<Sysname> display saved-configuration by-linenum
1:
#
2:
version 5.20, Test 5310
3:
#
4:
sysname Sysname
5:
#
6:
domain default enable system
7:
#
8:
telnet server enable
9:
#
10:
multicast routing-enable
11:
#
12:
vlan 1
13:
#
14:
vlan 999
15:
#
16:
domain system
17:
access-limit disable
18:
state active
19:
idle-cut disable
20:
self-service-url disable
21:
#
22:
interface NULL0
23:
#
---- More ----
The More prompt indicates that there are more line that the screen can display. Pressing Enter displays
the next line; pressing Space displays the next screen; pressing Ctrl+C or any other key exits the display.
display startup
Syntax
display startup [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
107