HP A7500 Series Command Reference Manual page 60

Use the undo debugging command to disable FTP client debugging.
By default, FTP client debugging is disabled.
Examples
# The device serves as the FTP client. Enable FTP client debugging and use the active mode to download
file sample.file from the current directory of the FTP server.
<Sysname> terminal monitor
<Sysname> terminal debugging
<Sysname> ftp 192.168.1.46
Trying 192.168.1.46 ...
Press CTRL+K to abort
Connected to 192.168.1.46.
220 FTP service ready.
User(192.168.1.46:(none)):ftp
331 Password required for ftp.
Password:
230 User logged in.
[ftp]undo passive
FTP: passive is off
[ftp] debugging
FTP: debugging switch is on
[ftp] get sample.file
---> PORT 192,168,1,44,4,21
200 Port command okay.
The parsed reply is 200
---> RETR sample.file
150 Opening ASCII mode data connection for /sample.file.
The parsed reply is 150
FTPC: File transfer started with the signal light turned on.
FTPC: File transfer completed with the signal light turned off.
.226 Transfer complete.
FTP: 3304 byte(s) received in 4.889 second(s), 675.00 byte(s)/sec.
[ftp]
Table 6 Output description
Field
---> PORT
The parsed reply is
---> RETR
FTPC: File transfer started with the signal light turned
on.
Description
Give an FTP order, with data port numbers being...
The received reply code, defined in RFC 959.
Download the file
File transfer starts, and the signal light is turned on.
53