HP A7500 Series Command Reference Manual page 129

When you upgrade Boot ROM for other LPUs of the IRF fabric, the file-url argument must contain the
•
slot number of the card and the member ID of the device where the card resides, such as
chassis3#slot5#flash:/test.btw.
Examples
# Use the a.btw file to upgrade Boot ROM on the active MPU in slot 0. (The output of this command
varies with devices.) (In standalone mode)
<Sysname> bootrom update file a.btw slot 0
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Attention:don't power down device, don't execute restart command such as slave
switchover!!!
Bootrom update succeeded in slot 0.
# Use the a.btw file to upgrade Boot ROM on the standby MPU in slot 1. (The output of this command
varies with devices.) (In standalone mode)
<Sysname> bootrom update file slot1#flash:/a.btw slot 1
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Attention:don't power down device, don't execute restart command such as slave
switchover!!!
Bootrom update succeeded in slot 1.
# Use the a.btw file to upgrade Boot ROM on the global active MPU in slot 0 of the device with member
ID of 2. (The output of this command varies with devices.) (In IRF mode)
<Sysname> bootrom update file a.btw chassis 1 slot 0
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Attention:don't power down device, don't execute restart command such as slave
switchover!!!
Bootrom update succeeded in slot 0.
# Use the a.btw file to upgrade Boot ROM on the interface card in slot 3 of the master with member ID
of 1. (The output of this command varies with devices.) (In IRF mode)
<Sysname> bootrom update file a.btw chassis 1 slot 3
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeed in chassis 1 slot 3.
# Use the a.btw file to upgrade Boot ROM on the global standby MPU in slot 1 of the device with
member ID of 1. (The output of this command varies with devices.) (In IRF mode)
<Sysname> bootrom update file chassis1#slot1#flash:/a.btw chassis 1 slot 1
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeed in chassis 1 slot 1.
122