HP A7500 Series Command Reference Manual page 216

View
Job view
Default level
3: Manage level
Parameters
view-name: Specifies a view name, a string of 1 to 90 characters. All commands in the job are executed
in the specified view.
Description
Use the view command to specify a view for a job.
Use the undo view command to remove the view of a job.
By default, no view is specified for a job.
Every job can have only one view. If you specify multiple views, the one specified the last takes effect.
Input a view name in its complete form and make sure that the view name is available on the switch. Most
commonly used view names include monitor for user view, system for system view, and Ethernet
GigabitEthernet
Examples
# Specify system view for the job saveconfig.
<Sysname> system-view
[Sysname] job saveconfig
[Sysname-job-saveconfig] view system
x/x/x
, or Ten-GigabitEthernet
x/x/x
for Ethernet interface view.
209
x/x/x
,