Display Device - HP A7500 Series Command Reference Manual

The output shows the CPU usage of task 6 (task name T03M) in the last 60 minutes:
5%: 20 minutes ago
•
• 2% or lower than 2%: other time

display device

Syntax
display device [ cf-card ] [ [ chassis chassis-number ] [ slot slot-number ] | verbose ] [ | { begin | exclude
| include } regular-expression ]
View
Any view
Default level
2: System level
Parameters
cf-card: Displays CF card information.
chassis chassis-number: Displays information about an IRF member switch. The chassis-number argument
represents the IRF member ID of the switch. If no member switch is specified, the command displays
information about all IRF member switches. (In IRF mode)
slot slot-number: Displays information about a card. The slot-number argument represents the slot number
of the card. If no card is specified, the command displays information about all cards.
verbose: Displays detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display device command to display device information.
Examples
# In standalone mode, display device information.
<Sysname> display device
Slot No.
0
1
2
3
4
The output shows that the switch has two MPUs and one LPU. The MPU in slot 0 is the standby MPU, the
MPU in slot 1 is the active MPU, and the LPU is in slot 2.
cpu-usage last 60 minutes(T03M)
Brd Type Brd Status
LSQ1SRP1CB Slave
LSQ1SRP1CB Master
LSQ1GP48EB Normal
NONE Absent
NONE Absent
Subslot Num Sft Ver
0 A7500-6626
0 A7500-6626
0 A7500-6626
0 NONE
0 NONE
163
Patch Ver
None
None
None
None
None