Examples
# Enable the modem to accept both incoming and outgoing calls.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] modem both
modem auto-answer
Syntax
modem auto-answer
undo modem auto-answer
View
AUX interface view
Default level
2: System level
Parameters
None
Description
Use the modem auto-answer command to configure the switch-side modem to operate in the
auto-answer mode.
Use the undo modem auto-answer command to restore the default.
By default, the switch-side modem operates in the manual answer mode.
Examples
# Configure the switch-side modem to operate in the auto-answer mode.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] modem auto-answer
modem timer answer
Syntax
modem timer answer seconds
undo modem timer answer
View
AUX interface view
Default level
2: System level
Parameters
seconds: Timeout time in seconds, in the range of 1 to 60. The default value is 30 seconds.
30