Product Features; Description - AEMC PowerPad 3945-B User Manual

3-phase power quality analyzer
Table of Contents

Advertisement

2.1 Description

The PowerPad
®
easy-to-use, compact and shock-resistant. It is intended for technicians and engi-
neers to measure and carry out diagnostic work and power quality work on one,
two or three phase low voltage networks.
Users are able to obtain instant waveforms of an electrical network's principal char-
acteristics, and also monitor their variation over a period of time. The multi-tasking
measurement system simultaneously handles all the measurement functions and
waveform display of the various magnitudes, detection, continuous recordings and
their display without any constraints.
Features:
Measurement of TRMS voltages up to 480V (phase-to-neutral) or 830V
(phase-to-phase) for two, three or four-wire systems
Measurement of TRMS currents up to 6500Arms
Measurement of DC voltage up to 850V
Measurement of DC current up to 1400A
Frequency measurement (41 to 70Hz systems)
Calculation of neutral current for WYE configurations
Calculation of Crest Factors for current and voltage
Calculation of the K Factor for transformers
Calculation of short-term flicker for voltage
Calculation of the phase unbalance for voltage and current (3 phase only)
Measurement of harmonic angles and rates (referenced to the fundamen-
tal or RMS value) for voltage, current or power, up to 50
Calculation of overall harmonic distortion factors
Monitoring of the average value of any parameter, calculated over a period
running from 1 sec to 2 hrs
Measurement of active, reactive and apparent power per phase and their
respective sum total
Calculation of power factor, displacement power factor and tangent factor
Total power from a point in time, chosen by the operator
Recording, time stamping and characterization of disturbance (swells, sags
and interruptions, exceedence of power and harmonic thresholds)
Detection of transients and recording of associated waveforms
Power Quality Analyzer Model 3945-B
CHAPTER 2

PRODUCT FEATURES

Model 3945-B is a three-phase power quality analyzer that is
(with MR193 probe)
DC
harmonic
th
11

Advertisement

Table of Contents
loading

Table of Contents