Battery Charge Status - AEMC PowerPad 3945-B User Manual

2.4 Battery Charge Status

Battery Charging
• Battery capacity level relative to full charge
• % of total capacity already charged (between 0 and 99%)
• Battery sign and % are blinking
Battery Full
• Battery sign and % are fixed
• % of total capacity is at 100%
Battery Discharging
• Battery capacity level relative to full charge
• % of the remaining capacity
• Battery sign and % are fixed
Battery Empty Discharging
• % of total capacity reads 0%
• Battery sign and % are fixed
New Battery Charging
• Fixed battery capacity level
• Question mark showing unknown capacity level
• Battery sign and % are blinking
New Battery Discharging
• Fixed battery capacity level
• Question mark showing unknown capacity level
• Battery sign and % are fixed
WARNING: The battery may fully discharge when recording for long periods
of time while not connected to a power supply. The PowerPad
tinue to record for some time, even if below the minimum battery charge
value. However, the display may not come back on, and will eventually stop
saving data when the battery is too low. All data recorded will be saved.
If in the Record Mode, and the display does not come ON, supply power to
the PowerPad
any button (other than ON/OFF) is pressed.
NOTE: When the 3945-B is stopped using the
requested if the equipment is in the process of recording.
16
with the line cord and the display will come back ON when
®
25% NOTE: Line cord is plugged in
NOTE: Line cord may or may not
100%
be plugged in
NOTE: Line cord is not plugged in
25%
NOTE: Line cord is not plugged in
0%
NOTE: Line cord is plugged in
?
NOTE: Line cord is not plugged in
?
Power Quality Analyzer Model 3945-B
®
button, a confirmation is
will con-