Recording - AEMC PowerPad 3945-B User Manual

4.1.8

Recording

• Highlight RECORDING with the
The following screen will appear:
SET-UP
• Four recording set-ups are available.
• Choose recording configuration 1, 2, 3, or 4 with the
• Next, move through the choices with the
parameters with the
As you move through the parameters, each choice, in turn, will be highlighted.
• To activate the selected parameter for recording, use the
The selected parameters will have a filled in
an unfilled .
• There are two user-defined parameters at the bottom of the window. At first,
they will be listed as a question mark "?". These parameters allow you to moni-
tor specific, or a range, of voltage, current or power harmonics.
To activate these parameters:
- Use the
- Next use the
These are: Uh, Vh, Ah, and VAh.
- Once the desired parameter is selected, use the
modifiable field for this parameter. A value from 00 to 50 may be selected
for this field using the
- After selecting the desired harmonic order for the beginning value, press
the button to move to the upper value. Use the same process to select
the upper limit.
36
Hz
buttons.
buttons to select the parameter.
buttons to scroll through the available choices.
buttons, then press the
Figure 4-5
buttons and select the desired
and those not selected will have
buttons.
Power Quality Analyzer Model 3945-B
button.
If these options are not
selected, all the harmonics
(odd and even) will be
recorded.
buttons.
buttons.
to move to the first