Table of Contents
Advertisement
5.6.2
Selecting or Deleting a Record
If the "@" symbol appears as the first letter of the recording name (e.g. @EST),
the data may be corrupted and should be checked carefully.
The status bar at the top displays the memory occupied by previous records.
To Select a Recording:
•
Press the
appear in bold type. Press the
To Delete a Recording:
•
Select the record to be deleted with the
and then press the
TIP: It is possible to display a measurement being recorded
by selecting the name of the recording. To refresh the screen,
press the mode buttons (caution: loss of cursor position and
zoom capability will occur).
The instrument automatically makes a correction if the programmed dates and
times do not match the current date, the current time or the set storage rate.
It is recommended to set multiple times:
- of 2 for 2 min
- of 5 for 5 min
The instrument automatically corrects the start and end time in order to
improve the readability of the time scales of the recording mode (graph rep-
resentation).
Power Quality Analyzer Model 3945-B
SELECTION OF RECORDING
TEST
07/25/02 17:58
PUMP
07/18/02 17:58
MOTORA
07/12/02 14:41
buttons to select the recording. The current selection will
button to delete the selection.
07/25/02 10:56
> In progress
> 07/18/02 11:45
> 07/12/02 16:40
Figure 5-20
button to accept the selection.
buttons, press on
100%
button
59
Advertisement
Table of Contents
