Configuring The Device As An Sftp Client; Sftp Client Configuration Task List; Specifying A Source Ip Address Or Source Interface For The Sftp Client - HP FlexFabric 5930 Series Security Configuration Manual

Task
Establish a connection
to an Stelnet server.

Configuring the device as an SFTP client

SFTP client configuration task list

Tasks at a glance
(Optional.)
(Required.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
Specifying a source IP address or source interface for the SFTP
client
By default, an SFTP client uses the IP address of the outbound interface specified by the route to the SFTP
server when communicating with the SFTP server. You can specify a source IP address or source interface
for the client to communicate with the server. To make sure that the SFTP client and the SFTP server can
Command
•
Establish a connection to an IPv4 Stelnet server:
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { 3des |
aes128 | aes256 | des } | prefer-ctos-hmac { md5
| md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 }
| prefer-stoc-cipher { 3des | aes128 | aes256 |
des } | prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] * [ dscp dscp-value | publickey
keyname | source { interface interface-type
interface-number | ip ip-address } ] *
•
Establish a connection to an IPv6 Stelnet server:
ssh2 ipv6 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ -i interface-type
interface-number ] [ identity-key { dsa | rsa } |
prefer-compress zlib | prefer- ctos-cipher { 3des |
aes128 | aes256 | des } | prefer-ctos-hmac { md5
| md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 }
| prefer-stoc-cipher { 3des | aes128 | aes256 |
des } | prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] *[ dscp dscp-value | publickey
keyname | source { interface interface-type
interface-number | ip ip-address } ] *

Specifying a source IP address or source interface for the SFTP client

Establishing a connection to an SFTP server
Working with SFTP directories
Working with SFTP files
Displaying help information
Terminating the connection with the SFTP server
112
Remarks
Use one of the commands.
Available in user view.