Sirona C2+ Cleaning And Care page 21

Sirona Dental Systems GmbH
Care and cleaning instructions for the practice team C2
A
SELECT MODE
PURGE / SANITATION
A
RETURN INSTR.
A
SELECT ITEMS
FOR SANITIZING
59 58 512 D 3370
D 3370.103.01.13.02
+ +
, M1
Sanitation
The sanitation process can be controlled either from the
dentist or assistant element.
The instructions for the assistant element are indicated
in parentheses.
The corresponding illustrations show the keys of the C2
on the left key block and the keys of the M1
key block.
•
SAN
SAN
•
•
Activation is only possible if there is sufficient DEN-
TOSEPT P in the refill container and if all instruments are
placed in their holders.
Error messages
If the instruments are not in place, the message
RETURN INSTR appears. Check that the instruments
are fitted firmly in their holders.
If there is not enough DENTOSEPT P in the refill con-
tainer, the DESINF message flashes. Replenish the con-
tainer.
In both cases, an acoustic signal sounds five times in
addition.
During the sanitation procedure, the display indicates
the individual phases.
Sanitation phase 1:
Press intensity key 1 for > 3 s
(assistant element: press SAN key for > 3 seconds).
SELECT MODE appears.
–
Select SAN using the
Confirm by briefly pressing intensity key 1 (assis-
tant element: briefly press the SAN key).
The LED of the SAN key on the assistant element
lights up.
i
NOTE
The following message appears on the display:
SELECT ITEMS FOR SANITIZING
6 Disinfection system
6.3 Sanitation
+
+
on the right
+
/ keys.
21