Table of Contents
Advertisement
AMI Codes-II
Program List and Explanations
5.2.1.40
5.2.1.40.10
5.2.1.40.20
5.2.1.40.11
5.2.1.40.21
5.2.1.40.12
5.2.1.40.22
5.2.1.40.13
5.2.1.40.23
A-96.250.571 / 050517
[mA]
20
10
12
0 / 4
2
4
6
1
10
100
0
1
2
X Measured value (logarithmic)
Scaling: Enter beginning and end point (Range low & high) of the
linear or logarithmic scale. In addition, the midpoint for the bilinear
scale.
Parameter DIS:
Range low: 0–10 ppm or 0–10 mg/l
Range high: 0–10 ppm or 0–10 mg/l
Parameter pH
Range low: 0 –14 pH
Range high: 0 –14 pH
Parameter Temperature
Range low: -30 to +120 °C
Range high: -30 to +120 °C
Parameter Sample flow
Range low: 0 –600 B/s
Range high: 0 –600 B/s
X
1'000
10'000
3
4
83
- Quick Links:
- Maintenance Schedule
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AMI Codes-II and is the answer not in the manual?
Questions and answers
Using the AMI Codes-II, there is Chlorine in the system, yet the system reads 0.00. Reseted, still no feedback. what could be the problem.
If the Swann AMI Codes-II system reads 0.00 for chlorine despite chlorine being present, possible issues could include:
1. Reagent Issues – The required reagents (OXYCON ON-LINE DPD, buffer solutions, etc.) might be depleted, expired, or improperly mixed.
2. Clogged or Dirty Components – The sample inlet, inlet filter, or flow regulating valve might be clogged, preventing proper water flow.
3. Calibration or Sensor Issues – The system may need recalibration, or the sensor might be faulty or improperly installed.
4. Power or Electrical Issues – The instrument may not be receiving proper power, or there could be an electrical fault affecting measurement.
5. Interference from Additives – Certain water additives like corrosion inhibitors or cyanuric acid might interfere with chlorine detection.
Checking reagent levels, cleaning components, recalibrating, and verifying power and water flow can help identify and resolve the issue.
This answer is automatically generated
Please share Data Sheet for the Pherispatic Pump