Test Programme - Miele PG 8583 Operating Instructions Manual

Renaming a
dispensing
system
If required the names of the dispensing systems "
can be extended to include additional information e.g.
agent
". The name "DOS" and the accompanying number cannot be
changed.
Use this option to document all changes to factory settings in case
of a subsequent Service call requirement.
If the option
Change name
–
has been selected, the display changes to the following view:
Change name
The current name is shown on the second line of the display. This can
be changed using the options shown in the bottom line. The top line
shows which option has been selected from the bottom line.
Names may consist of up to 15 characters including spaces. The
following options are available:
A
– Letters from to
each new word will start with a capital letter.
– Numbers from 0 to
– Space .
– Use the  symbol to delete the last position.
– The name is saved when the
The display will then revert to the initial menu.
– The  symbol in the display or the  button end the process
without saving the name change. The display reverts to the initial
menu.
Use the arrow buttons  (right) and  (left) to move the cursor to

the option you require.
Confirm each entry with OK.


Test programme

Various programmes are available for monitoring cleaning
performance in routine testing.
See "Maintenance" for more information on these programmes.
Z
,
9 .
OK
symbol in the display is selected.
Further settings
DOS1
", "DOS2" etc.
"DOS1 cleaning
89